Step 1
Lay down a clear plate on the backing paper and draw around the plate and cut about 1 inch larger.

Step 2
Draw line (like you were cutting a pie - from edge to center (faint, but there is a center circle drawn as well to match that of the plate.

Step 4
Glue down the inner circle only - smooth out bubbles - don't worry if the glue goes down the edges and no need to clean.

Step 6
Gently fold back the 'pie' pieces to the end of the cut line.

Step 7
Glue down each individual piece, overlapping the pieces slightly - notice that the pattern is not really out of sync.